Photo Credit: Supconnect
HOW TO INSTALL A FIN ON YOUR PADDLE BOARD
Paddle boards come with a variety of fin styles. The most common style, which is featured on all TAHE paddle boards, is the “US Box” center fin. The fin “box” is part of the board and is the track where the fin is inserted. TAHE paddle boards feature a removable fin which is secured in the fin box track using a screw and plate. To the uninitiated it’s not always obvious how to install the fin, but once you get the hang of it it’s a straightforward process. To clear up any confusion you might have, we’ve created a step-by-step guide to get your fin on your board and you out on the water! Check out our guide below and watch the video at the end to see the process in action.
Step 1: Remove the screw and plate from the fin.
Step 2: Insert the plate FLAT into the fin box track and slide all the way to the front of the fin box.
Step 3: Align the plate in the fin box with the small hole in the front of the fin. Insert the thumb screw and tighten down, securing the screw to the plate.
For Permanent Fins: Some boards come with fins permanently installed. These fins are made of a highly durable material called TPU. This material is flexible allowing the fins to bend and not break. It is normal for the fins to bend during shipping and storage. If fins are bent you can straighten them by bending back into place with your hand or using your foot to apply more pressure.
FIN INSTALLATION & MAINTENANCE
FIN INSTALLATION & MAINTENANCE